19 Inch 36U Optical Fiber Distribution Cabinet Indoor Floor Standing Type

fiber optic cabinet 19inch rack load ODF

ODF is a fiber optic high-capacity, high-density fiber distribution frame, suitable for the composition and distribution of fibers in optical access network to achieve the fiber optic lines connection, distribution and scheduling.

Specification:

Features:

Standard 19’’ installation; fully enclosed structure; with high intensity and anti-erosion performance.

Mild steel frame, electrostatic spraying in the whole surface, RAL7035.

Full front operation; can be installed against wall, side by side or back to back.

Complete cable routing design with fiber bend radius over 30mm.

Inlet/Outlet cables from top & bottom, suitable for Mini.8 fiber cable of 21mm diameter incoming cable, together with Mini.8 cable holder.

The outgoing cable entries/ports shall fit minimum 900 patch cords of 3mm diameter each.

Built-in direct melt unit capable of providing direct connection functionality.

With secure and reliable fastening and grounding protection devices for the optic fiber.

Suitable for ribbon and non-ribbon optical fibers, and inserting installation of SC, FC, ST (additional flange) adapters.

Can be installed with value-added modular units, such as fiber optic splitter panel.

With lockable-common-key front door and detachable back panel.

Capacity up to 1152 fibers, can be flexibly customized as required.

Technical Parameters:

Nominal work wave-length: 850nm, 1310nm, 1550nm

Operating temperature: -5℃-+40℃

Storage temperature: -40℃ +70℃

Relative humidity:≤85%(+30℃)

Atmospheric pressure: 70~106 KPa

Insertion loss: ≤0.2dB

Return loss:≥45dB (PC), ≥50dB(UPC), ≥60dB(APC)

Isolation resistance:≥1000MΩ/500V(DC)

Durability:＞1000 times

Anti-voltage strength: ≥3000V(DC)/1min

Application:

Communications

Networks

Industrial control

Building automation